| Battery Testing |
| GOLD-PLUS 6/12V Intelligent Battery Test |
 |
- GOLD PLUS tests 6V and 12V SLA, GEL and Flooded batteries between 1.2Ah and 100Ah
- Max 12V battery that can be tested 150Ah
- Displays DC voltage and actual Ampere-hour (Ah) capacity available in seconds
- Unique ‘Ah Calibration Control’ feature allows the operator to test various types of lead acid battery technology including standby SLA, cyclic GEL and car FLOODED
- Ideal for those who need to test multiple battery technologies effectively
...Click for More.... |
|
|
|
| |
| D4000 Emergency Lighting Battery Tester |
 |
- Tests ALL rechargeable batteries between 2.4V and 12V, with capacities above 4Ah
- Ideal for testing various battery types including lead-acid, lithium-ion, nickel-cadmium and nickel metal hydride
- Simulates a 1 hour and full battery duration test in minutes by discharging 1Ah from the battery (single test)
- Identifies flat batteries in seconds
- Fully automatic, simulated load tests with pass and fail LED indication
...Click for More.... |
|
|
|
| |
| RED/GOLD-IBT £60 CASHBACK |
 |
Receive £60.00 cashback when trading-in your old Red/Gold-IBT in any condition for the new GOLD-PLUS 6/12V Intelligent Battery Tester!
...Click for More.... |
|
|
|
| |
| ZTS Multi-Battery Tester |
 |
deal for testing Wire-Free Alarm System batteries, the ZTS Multi-Tester provides a fully automatic pulse load test to determine the percentage of capacity available in 1.2V, 1.5V, 3V and 9V Alkaline, Lithuim, NiMH Carbon Zinc batteries. ...Click for More.... |
|
|
|
| |
| Megapulse MK5 Battery Rejuvenator |
 |
- Uses pulse technology to suppress sulphation build-up on battery plates
- Ensures peak battery performance and maximum life
- Installs onto the positive and negative battery terminals of a single battery or a
battery bank - Autotomatically selects the correct voltage system for testing 6V to 48V batteries
- Can condition a single battery or a bank of batteries up to 2000Ah
...Click for More.... |
|
|
|
| |
| BTL (Battery Tested Labels) |
 |
- Insertions for temperature, volts, Ah, user initials and date
- 250 labels supplied per roll
...Click for More.... |
|
|
|
| |
| ZTS Multi-Battery Tester |
 |
Ideal for testing Wire-Free Alarm System batteries, the ZTS Multi-Tester provides a fully automatic pulse load test to determine the percentage of capacity available in 1.2V, 1.5V, 3V and 9V Alkaline, Lithuim, NiMH Carbon Zinc batteries. ...Click for More.... |
|
|
|
| |
| Multimeters, Accessories & Clamp |
| 3000 Autoranging Multimeter CATIII |
 |
- Fully autoranging on resistance, voltage and current
- Manual ‘range’ override button
- Extra large 3200 count with bargraph LCD display
- Takes accurate measurements of induced AC voltage levels which cause intermittent, unexplained false alarms
- Continuity beeper enables normally closed circuits to be tested audibly
- Handy magnetic back allows meter to be securely mounted on metal boxed control panels and power supplies
...Click for More.... |
|
|
|
| |
| NEW AVO300 Autoranging Multimeter |
 |
- Fully auto-ranging on AC/DC, resistance and current measurements
- Separate fuse and battery compartment, allows both to be replaced without breaking the calibration seals
- Tough rubber-armoured case
- Built-in rear stand provides both a bench stand as well as extending round 180° to act as a hanging bracket
- Large, uncluttered display, 3½ digit LCD
- Data HOLD function
- Low Battery and Auto-off function
- CAT III 600V safety
...Click for More.... |
|
|
|
| |
| 720 Datalogging Multimeter CATIV |
 |
- Measures AC/DC voltage and current, resistance, frequency, capacitance, temperature, diode and continuity
- Independent datalogger, with 10 selectable sample rates
- Storage for up to 43,000 data points
- High resolution 5000 count backlit LCD display with bargraph
- Download feature to collect, save or create graphic displays of event data
...Click for More.... |
|
|
|
| |
| NEW Fluke TwistGuard Test Leads |
 |
Fluke TL175 Test Leads with extendable tip sheath meets new electrical safety requiremets to reduce tip exposure while providing the flexibility you need. Ratings: CAT III 1000 V. CAT IV 600 V. CAT II 1000 V. 10 Amps Max. Conforms to EN/IEC 61010-031:2002 + A1:2008. Optional Fluke AC72 Screw On Alligator Clips. ...Click for More.... |
|
|
|
| |
| NEW ACT 212 Alarm Circuit Test Lead Kit |
 |
The new ACT 212 Alarm Circuit Test Lead Kit is designed to simplify alarm circuit testing and fault finding with your multimeter. The spring hooks simplify making reliable connections to alarm circuits when testing with your multimeter. The adjustable cable piercers enable you to quicky connect and test anywhere along the circuit in order to locate and identify faults. ...Click for More.... |
|
|
|
| |
| Multimeters Accessories |
 |
- ACT 415 Standard Test Leads
- ACT 416 Quality Test Leads
- ACT 418 Professional Test Leads
- ACT 418F Pro Fused Test Leads
- ACT 410 Small Multimeter Case
- ACT 430N Large Multimeter Case
...Click for More.... |
|
|
|
| |
| CA60 mA Current Clamp |
 |
- Enables mA current readings to be made without disconnecting circuit wires
- Measures AC/DC current from 10mA to 60Amps
- Features dual hall effect sensors designed to work in narrow spaces and connects to any multimeter with a 200mV or 2V range
- Operates by opening and placing its jaws around the wire, ensuring a secure connection
- Ideal for recording mA readings for commissioning and maintenance inspections
...Click for More.... |
|
|
|
| |
| Calibration Products |
| CALMASTER Multimeter Calibration |
 |
- Enables inhouse testing and recalibration of multimeters to meet BS ISO9000 requirements
- Works in conjunction with your own calibrated multimeter
- Quickly compares accuracy between calibrated meter and the meter under test
- Allows you, if necessary, to adjust and recalibrate the meter under test to match the calibrated meter
- Tests AC/DC voltage, resistance and DC current
...Click for More.... |
|
|
|
| |
| BATMASTER Battery Calibration |
 |
- Enables in-house testing and re-calibration of RED/GOLD-IBT and new GOLD PLUS intelligent battery testers to meet BS ISO9000 requirements
- Works in conjunction with your own calibrated multimeter
- Quickly compare DCV accuracy between calibrated meter and meter under test
- Tests and verifies accuracy of Ah capacity
- Minimises downtime and reduces calibration and postage costs
...Click for More.... |
|
|
|
| |
| IBT CALKITS |
 |
- InHouse calibration kits for the RED and GOLD-IBT Intelligent Battery Testers
- Kit consists of calibrated leads, clips, labels and instructions
- Simple, time saving and cost-effective way of recalibrating your intelligent battery tester
...Click for More.... |
|
|
|
| |
| GOLD-PLUS-CALKIT |
 |
- Re-calibration kit for GOLD-PLUS 6/12V Intelligent Battery Tester. Each kit supplied with calibrated plug-in test leads and new labels.
...Click for More.... |
|
|
|
| |
| LB1 In House Calibration Labels |
 |
Insertions for serial number, user initials, calibration date and re-calibration due250 labels supplied per roll ...Click for More.... |
|
|
|
| |
| Verifier |
| Verifier Advanced Cable Tester |
 |
VERIFIER is a unique cable tracer that uses variable tones to trace hidden cables and test circuit devices to locate intermittant faults. It enables the engineer to quickly walk-test the circuit under test and audibly locate faults in a fraction of the normal time. ...Click for More.... |
|
|
|
| |
| Telephone Test Set |
| 452 Telephone Test Set |
 |
- Safe to use on analogue and digital lines
- ‘TALK’ and ‘MONITOR’ modes enable lines to be tested without disrupting signals
- Digital Service Protection (DSP) enables safe operation where telephone wiring may carry digital signals, hazardous voltages or fault connections
- ‘POL’ test button with green/red LEDs indicate correct or reverse A/B polarity connection
- Built-in over current protection against 230VAC and lightning surges
...Click for More.... |
|
|
|
| |
| Alarm Troubleshooting |
| 1313 12V Spike Suppressor |
 |
- Protects alarm control equipment and detectors from induced AC
and nearby lightning - Clamps 12VDC against electrical spikes and connects between 12VDC supply and mains earth
- Essential for control panels and PSUs
...Click for More.... |
|
|
|
| |
| 1414 24V Spike Suppressor |
 |
- Protects 24VDC fire alarm panels from induced AC and nearby lightning
- Clamps 24VDC against electrical spikes and connects between 24VDC supply and mains earth
...Click for More.... |
|
|
|
| |
| 2323 230V Mainspike Suppressor |
 |
- Continuously protects all security and fire alarm panels, CCTV cameras,
access control equipment and security lighting from false alarms and malfunctions - Provides up to 4,500 Amps spike suppression across live, neutral and Earth
- Neat modular shape fits easily with simple parallel connections to LNE
...Click for More.... |
|
|
|
| |
| 1166 Earth Line Choke |
 |
- Prevents electrical RFI from affecting the 12VDC supply on metal control panels
- Connect in line with mains earth inside the control panel
...Click for More.... |
|
|
|
| |
| 230MSF 230V Mains (EMI/RFI) Filter |
 |
- Protects against EMI/RFI and nearby lightning via the 230VAC mains supply
- Clamps induced mains spikes
- Suppresses radio frequency interference and protects equipment on a
continuous basis - Will self sacrifice in the event of a direct lightning strike
- Terminal connections provided: brown live, blue neutral and green/yellow earth
...Click for More.... |
|
|
|
| |
| 211 Intruder Mainspike Suppression Kit |
 |
- Kit provides the best protection against EMI via the AC, DC supply and earth, for metal intruder control panels
- Each filter will continuously clamp electrical spikes via the respective supply to help protect your equipment
- Kit consists of ACT 2323, ACT 1166 and ACT 1313
...Click for More.... |
|
|
|
| |
| 211 Fire Mainspike Suppression Kit |
 |
- Kit provides the best protection against EMI via the AC, DC supply and earth, for metal fire control panels
- Each filter will continuously clamp electrical spikes via the respective supply to help protect your equipment
- Kit consists of ACT 2323, ACT 1166 and ACT 1414
...Click for More.... |
|
|
|
| |
| CPS3 Intruder Control Panel Suppression |
 |
- Kit provides the best protection against EMI, RFI and nearby lightning via the AC, DC supply and earth, for metal intruder control panels
- Each filter will continuously clamp electrical spikes via the respective supply to help protect your equipment
- Kit consists of ACT 230MSF, ACT 1166 and ACT 1313
...Click for More.... |
|
|
|
| |
| CPS3 Fire Control Panel Suppression Kit |
 |
- Kit provides the best protection against EMI, RFI and nearby lightning via the AC, DC supply and earth, for metal fire control panels
- Each filter will continuously clamp electrical spikes via the respective supply to help protect your equipment
- Kit consists of ACT 230MSF, ACT 1166 and ACT 1414
...Click for More.... |
|
|
|
| |
| 1376 PIR RFI Stabiliser |
 |
- Prevents RFI from affecting a troublesome PIR or dual detector
- Powers a PIR or dual detector for up to 250ms in the event of a DC spike
- Eliminates replacing non-defective motion sensors
- Fitted either inside or behind the troublesome detector with the 12VDC supply connected through
...Click for More.... |
|
|
|
| |
| 2468 8-Way RFI Filter |
 |
- Used to reduce RFI to alarm detectors, sounders and DC access control circuits
- Works on 12V and 24VDC, normally closed, end-of-line and fire alarm circuits
- Connects between alarm circuit wiring & control equipment
- Supplied as a 1 x 8 block which can be snapped apart to make 2 x 4 ways or 4 x 2 ways as required
...Click for More.... |
|
|
|
| |
| 4425 ID Line RFI Filter |
 |
- Prevents RFI false alarms on iD alarm systems
- Connects between the blue and yellow data wires and the input terminals of the alarm control panel
- Allows data to pass through normally but prevents RFI entering into the control panel
- Should be fitted to all iD systems, especially on take-overs where existing wiring has been used, to prevent potential false alarms from occurring
...Click for More.... |
|
|
|
| |
| 3010 12V Data Ferrite Tubes |
 |
- Reduces RFI signals from alarm circuit wiring
- Slides over DC, data and contact wires
- Fit as standard to both ends of alarm cabling
- Wideband EMI attenuation from 30 to 1000MHz
- Fits easily inside control panels, PIRs, vipers, keypads etc
- 50 Pieces per pack
...Click for More.... |
|
|
|
| |
| 4343 Boxed Hardwired ADSL Broadband Filt |
 |
- New low cost Boxed Hardwired ADSL Broadband Filter. Enables analogue alarm signals to operate securely on broadband ADSL lines
- Meets SIN 346 requirements
- Provides terminal connections to be wired directly to the BT phone socket and alarm equipment
- Suitable for REDCARE, digital communicators and speech dialers
...Click for More.... |
|
|
|
| |
| 120L Transistorised Relay |
 |
- Eliminates false alarms on a troublesome zone or tamper circuit
- Easy to install and can be used on positive or negative‘normally closed’ circuits
- Includes an ‘optional latch-link’ enabling the module to be triggered by a momentary >5+ or 0V signal
...Click for More.... |
|
|
|
| |
| 4201 4Zone OptoIsolator |
 |
- Prevents false alarms on up to 4 normally closed alarm circuits by isolating the circuit wiring from the control panel zone or tamper input circuit
- Particularly beneficial on alarm takeovers when updating control equipment, but retaining alarm circuit wiring
...Click for More.... |
|
|
|
| |
